% \iffalse meta-comment
% Copyright 1993 1994 1995 1996 1997
% The LaTeX3 Project and any individual authors listed elsewhere
% in this file. 
% For further copyright information, and conditions for modification
% and distribution, see the file legal.txt, and any other copyright
% notices in this file.
% This file is part of the LaTeX2e system.
% ----------------------------------------
%   This system is distributed in the hope that it will be useful,
%   but WITHOUT ANY WARRANTY; without even the implied warranty of
%   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
%   For error reports concerning UNCHANGED versions of this file no
%   more than one year old, see bugs.txt.
%   Please do not request updates from us directly.  Primary
%   distribution is through the CTAN archives.
% IMPORTANT COPYRIGHT NOTICE:
% You are NOT ALLOWED to distribute this file alone.
% You are allowed to distribute this file under the condition that it
% is distributed together with all the files listed in manifest.txt.
% If you receive only some of these files from someone, complain!
% Permission is granted to copy this file to another file with a
% clearly different name and to customize the declarations in that
% copy to serve the needs of your installation, provided that you
% comply with the conditions in the file legal.txt.
% However, NO PERMISSION is granted to produce or to distribute a
% modified version of this file under its original name.
% You are NOT ALLOWED to change this file.
% \fi
% This document will typeset the LaTeX sources as a single document.
% This will produce quite a large file (roughly 530 pages) and may
% take a long time.
% Some notes on processing this document are contained at the end
% of this document, after \end{document}
% DPC 1995/12/12
% First a special index style for makeindex
\begin{filecontents}{source2e.ist}
actual '='
quote '!'
level '>'
preamble
"\n \\begin{theindex} \n \\makeatletter\\scan@allowedfalse\n"
postamble
"\n\n \\end{theindex}\n"
item_x1   "\\efill \n \\subitem "
item_x2   "\\efill \n \\subsubitem "
delim_0   "\\pfill "
delim_1   "\\pfill "
delim_2   "\\pfill "
% The next lines will produce some warnings when
% running Makeindex as they try to cover two different
% versions of the program:
lethead_prefix   "{\\bfseries\\hfil "
lethead_suffix   "\\hfil}\\nopagebreak\n"
lethead_flag       1
heading_prefix   "{\\bfseries\\hfil "
heading_suffix   "\\hfil}\\nopagebreak\n"
headings_flag       1
% and just for source2e:
% Remove R so I is treated in sequence I J K not I II III
page_precedence "rnaA"
\end{filecontents}
\documentclass{ltxdoc}
\listfiles
% Do not index some TeX primitives, and some common plain TeX commands.
\DoNotIndex{\def,\long,\edef,\xdef,\gdef,\let,\global}
\DoNotIndex{\if,\ifnum,\ifdim,\ifcat,\ifmmode,\ifvmode,\ifhmode,%
            \iftrue,\iffalse,\ifvoid,\ifx,\ifeof,\ifcase,\else,\or,\fi}
\DoNotIndex{\box,\copy,\setbox,\unvbox,\unhbox,\hbox,%
            \vbox,\vtop,\vcenter}
\DoNotIndex{\@empty,\immediate,\write}
\DoNotIndex{\egroup,\bgroup,\expandafter,\begingroup,\endgroup}
\DoNotIndex{\divide,\advance,\multiply,\count,\dimen}
\DoNotIndex{\relax,\space,\string}
\DoNotIndex{\csname,\endcsname,\@spaces,\openin,\openout,%
            \closein,\closeout}
\DoNotIndex{\catcode,\endinput}
\DoNotIndex{\jobname,\message,\read,\the,\m@ne,\noexpand}
\DoNotIndex{\hsize,\vsize,\hskip,\vskip,\kern,\hfil,\hfill,\hss}
\DoNotIndex{\m@ne,\z@,\z@skip,\@ne,\tw@,\p@}
\DoNotIndex{\dp,\wd,\ht,\vss,\unskip}
% Set up the Index and Change History to use \part
\IndexPrologue{\part*{Index}%
                 \markboth{Index}{Index}%
                 \addcontentsline{toc}{part}{Index}%
                 The italic numbers denote the pages where the
                 corresponding entry is described,
                 numbers underlined point to the definition,
                 all others indicate the places where it is used.}
\GlossaryPrologue{\part*{Change History}%
%                Allow control names to be hyphenated here...
                 {\GlossaryParms\ttfamily\hyphenchar\font=`\-}%
                 \markboth{Change History}{Change History}%
                 \addcontentsline{toc}{part}{Change History}}
% The standard \changes command modified slightly to better cope with
% this multiple file document.
\makeatletter
\def\changes@#1#2#3{%
  \let\protect\@unexpandable@protect
  \edef\@tempa{\noexpand\glossary{#2\space\currentfile\space#1\levelchar
                                 \ifx\saved@macroname\@empty
                                   \space
                                   \actualchar
                                   \generalname
                                 \else
                                   \expandafter\@gobble
                                   \saved@macroname
                                   \actualchar
                                   \string\verb\quotechar*%
                                   \verbatimchar\saved@macroname
                                   \verbatimchar
                                 \fi
                                 :\levelchar #3}}%
  \@tempa\endgroup\@esphack}
\makeatother
% Produce a Change Log and (2 column) Index.
\RecordChanges
\CodelineIndex
\EnableCrossrefs
\setcounter{IndexColumns}{2}
\begin{document}
 \title{The \LaTeXe\ Sources}
 \author{%
  Johannes Braams\\
  David Carlisle\\
  Alan Jeffrey\\
  Leslie Lamport\\
  Frank Mittelbach\\
  Chris Rowley\\
  Rainer Sch\"opf}
% This command will be used to input the patch file
% if that file exists.
\newcommand{\includeltpatch}{%
  \def\currentfile{ltpatch.ltx}
  \part{ltpatch}
  {\let\ttfamily\relax
    \xdef\filekey{\filekey, \thepart={\ttfamily\currentfile}}}%
  Things we did wrong\ldots
  \IndexInput{ltpatch.ltx}}
% Get the date from ltvers.dtx
\makeatletter
\let\patchdate=\@empty
\begingroup
   \def\ProvidesFile#1\fmtversion#2{\date{#2}\endinput}
   \input{ltvers.dtx}
\global\let\X@date=\@date
% Add the patch version if available.
   \long\def\Xdef#1#2#3\def#4#5{%
    \xdef\X@date{#2}%
    \xdef\patchdate{#5}%
    \endinput}%
   \InputIfFileExists{ltpatch.ltx}
    {\let\def\Xdef}{\global\let\includeltpatch\relax}
\endgroup
\ifx\@date\X@date
   \def\Xpatch{0}
   \ifx\patchdate\Xpatch\else
     \edef\@date{\@date\space Patch level \patchdate}
   \fi
\else
   \@warning{ltpatch.ltx does not match ltvers.dtx!}
   \let\includeltpatch\relax
\makeatother
 \pagenumbering{roman}
 \maketitle
 \renewcommand\maketitle{}
 \tableofcontents
 \clearpage
 \pagenumbering{arabic}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Each of the following \DocInclude lines includes a file with extension
% .dtx. Each of these files may be typeset separately. For instance
% latex ltboxes.dtx
% will typeset the source of the LaTeX box commands.
% If this file is processed, each of these separate dtx files will be
% contained as a part of a single document. Using ltxdoc.cfg you can
% then optionally produce a combined index and/or change history for
% the entire source of the format file. Note that such a document will
% be quite large (about 530 pages).
 \DocInclude{ltdirchk} % System dependant initialisation
 \DocInclude{ltplain}  % LaTeX version of Knuth's plain.tex
 \DocInclude{ltvers}   % Current version date
 \DocInclude{ltdefns}  % Initial definitions.
 \DocInclude{ltalloc}  % Allocation of counters and others.
 \DocInclude{ltcntrl}  % Program control macros.
 \DocInclude{lterror}  % Error handling.
 \DocInclude{ltpar}    % Paragraphs.
 \DocInclude{ltspace}  % Spacing, line and page breaking.
 \DocInclude{ltlogos}  % Logos.
 \DocInclude{ltfiles}  % \input files and related commands
 \DocInclude{ltoutenc} % Output encoding interface
 \DocInclude{ltfssbas} % NFSS Base macros
 \DocInclude{ltfsstrc} % NFSS Tracing (and tracefnt.sty)
 \DocInclude{ltfsscmp} % NFSS1 Compatibility
 \DocInclude{ltfssdcl} % NFSS Declarative interface
 \DocInclude{ltfssini} % NFSS Initialisation
 \DocInclude{fontdef}  % fonttext.ltx/fontmath.ltx
 \DocInclude{preload}  % preload.ltx
 \DocInclude{ltfntcmd} % \textrm etc
 \DocInclude{ltcounts} % Counters
 \DocInclude{ltpageno} % Page numbering
 \DocInclude{ltxref}   % Cross referencing
 \DocInclude{ltlength} % Lengths
 \DocInclude{ltmiscen} % Miscellaneous environment definitions.
 \DocInclude{ltmath}   % Mathematics set up.
 \DocInclude{ltlists}  % List and related environments
 \DocInclude{ltboxes}  % Parbox and friends
 \DocInclude{lttab}    % Tabbing tabular and array
 \DocInclude{ltpictur} % Picture mode
 \DocInclude{ltthm}    % Theorem environments
 \DocInclude{ltsect}   % Sectioning
 \DocInclude{ltfloat}  % Floats
 \DocInclude{ltidxglo} % Index and Glossary
 \DocInclude{ltbibl}   % Bibliography
 \DocInclude{ltpage}   % \pagestyle \raggedbottom \sloppy
 \DocInclude{ltoutput} % Output routine
 \DocInclude{ltclass}  % Package & Class interface
 \DocInclude{lthyphen} % Hyphenation (hyphen.ltx).
 \DocInclude{ltfinal}  % Last minute initialisations and dump
 \includeltpatch       % Corrections distributed after the full release
% Stop here if ltxdoc.cfg says \AtEndOfClass{\OnlyDescription}
\StopEventually{\end{document}}
\clearpage
\pagestyle{headings}
% Make TeX shut up.
\hbadness=10000
\newcount\hbadness
\hfuzz=\maxdimen
\typeout{%
  Produce change log with^^J%
  makeindex -s gglo.ist -o source2e.gls source2e.glo}
\PrintChanges
\clearpage
% makeindex needs a symbol between the parts of composite page numbers
% but we dont want one, so:
\typeout{%
  Produce index with^^J%
  makeindex -s source2e.ist source2e.idx}
\begingroup
\def\endash{--}
\catcode`\-\active
\def-{\futurelet\temp\indexdash}
\def\indexdash{\ifx\temp-\endash\fi}
\PrintIndex
\endgroup
% Make sure that the index is not printed twice
% (ltxdoc.cfg might have a second \PrintIndex command)
\let\PrintChanges\relax
\let\PrintIndex\relax
\end{document}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
To use this file to produce a fully indexed source code
you need to execute the following (or equivalent) commands:
   latex source2e.tex
   makeindex -s source2e.ist source2e.idx
   makeindex -s gglo.ist -o source2e.gls source2e.glo
   latex source2e.tex
   latex source2e.tex
The makeindex style source2e.ist is used in place of the usual
doc gind.ist to ensure that I is used in the sequence I J K
not I II II, which would be the default makeindex behaviour.
The third run with latex is only required to get the table of
contents entries for the change log and index. You may speed things up
by using the \includeonly mechanism so as not to typeset the source
files on the second run. This involves changing the file
ltxdoc.cfg
between the latex runs.
The following unix script automates this.
  (It could easily be ported to scripts for DOS or VMS,
   rm is ReMove a file, and echo "..." > file writes ... to "file".)
After this script (after the second ==============) is a similar script
that will produce the documentation for all the files in the base
distribution that are *not* included in source2e.dvi. This second script
was requested, but before using it, beware it will take a long time!
It may however be modified as required, eg to not typeset the fdd files
or whatever...
==============
#!/bin/sh
rm  -f source2e.gls source2e.ind source2e.toc
# First run: 
# Create new standard ltxdoc.cfg file
# Pass the (possibly empty) list of arguments supplied on the
# command line to article class.
# If you use A4 paper, running this script with argument
#    a4paper
# may save about 30 pages.
echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
# Now LaTeX the file with this cfg file.
latex source2e.tex
# Make the Change log and Glossary.
makeindex -s source2e.ist source2e.idx
makeindex -s gglo.ist -o source2e.gls source2e.glo
# Second run: append \includeonly{} to ltxdoc.cfg to speed up things
# (this run needed only to get changes and index listed in .toc file)
# Note that the index will not be made incorrect by the insertion
# of the table of contents as the front matter uses a diferent page
# numbering scheme.
echo "\includeonly{}" >> ltxdoc.cfg
latex source2e.tex
# Third and final run, to put everything together.
# First restore the cfg file:
echo "\PassOptionsToClass{$*}{article}" > ltxdoc.cfg
latex source2e.tex
==============
#!/bin/sh
# Running this script will process all the dtx fdd and *guide.tex
# and ltnews*.tex files in the LaTeX distribution, except the dtx
# files included in source2e.tex. 
# (The shell first script in the comments of source2e.tex will
#  process those.)
# Any command line arguments (eg a4paper) are taken as options to the
# article class.
# This script is likely to take ages!
echo "\PassOptionsToClass{$*}{article}"                  > ltxdoc.cfg
echo "\batchmode"                                       >> ltxdoc.cfg
# The next four lines produce full indexes and change logs
# you may not want those.
echo "\AtBeginDocument{\RecordChanges}"                 >> ltxdoc.cfg
echo "\AtEndDocument{\PrintChanges}"                    >> ltxdoc.cfg
echo "\AtBeginDocument{\CodelineIndex\EnableCrossrefs}" >> ltxdoc.cfg
echo "\AtEndDocument{\PrintIndex}"                      >> ltxdoc.cfg
# If you do not want any code listings, just documentation, then instead
# of the above four lines, uncomment the following:
# echo "\AtBeginDocument{\OnlyDescription}"                >> ltxdoc.cfg
echo "\PassOptionsToClass{$*}{article}"                  > ltxguide.cfg
echo "\batchmode"                                       >> ltxguide.cfg
cp ltxguide.cfg ltnews.cfg
for i in *dtx *fdd *guide.tex ltnews*.tex
B=`basename $i .dtx`
if (grep "Include{$B}" source2e.tex >/dev/null ; )
echo In source2e: $i
echo latex $i
  if (latex $i > /dev/null) 
  then
    echo latex $i
    latex $i > /dev/null
    echo makeindex -s gind.ist $B.idx
    makeindex -s gind.ist $B.idx > /dev/null 2> /dev/null
    echo makeindex -s gglo.ist -o $B.gls $B.glo
    makeindex -s gglo.ist -o $B.gls $B.glo > /dev/null 2> /dev/null
    echo latex $i
    latex $i > /dev/null
  else
    echo "!!! LaTeX ERROR: $i. (See $B.log.)"